Measures for people with bad eye sight ?!

You could use an indelible marker that will not wash off to mark the most common levels you use!.

I would also contact The Blind Foundation to see if they have any suitable products or can tell you where to go!.

The other alternative would be to buy pint, quart and 1/2 gallon jugs individually!.

Get a set of measuring spoons and cups!.Www@FoodAQ@Com

---

---

The RNIB do a talking measuring jug for people who are visually impaired

Lol, sorry if that's too expensive !.!.!.!.!.Cuisiporo do one for under a tenner that you might find helpful x

http://www!.saltandpepper!.co!.uk/cook_shop!.!.!.Www@FoodAQ@Com

---

---

Get individual measuring cups for each measurement (1 cup, 1/2 c, etc)!. You can get those sets anywhere, and they're very cheap!. Then you just have to fill it to the top and not have to worry about seeing the markings on a larger measurement!. But, the red writing on Pyrex measuring jugs is pretty easy to read too!.!.!.!.!.Www@FoodAQ@Com

---

---

You can get the individually sized 'nesting' measuring cups and spoons, then mark them largely on the side with either with an indelible marker, or a braille label maker!. You just fill each one to the top and level it off!.Www@FoodAQ@Com

---

---

You can buy a "Say When" liquid level indicator from this site!.

http://www!.lighthouse-sf!.org/catalog/ind!.!.!.Www@FoodAQ@Com

---

---

I noticed one at wal-mart with raised lettering on the sides and I thought kinda like braille for vision impaired!. Have to be careful with hot measurements though!.Www@FoodAQ@Com

---

---

huh!? just guess, i do a mugs about 1/2 a pintWww@FoodAQ@Com

---

---