Custom beer pong table?!
im making a custom beer pong table out of 1/2 inch ply wood!. i already cut it to the correct length and i layed 2 coats of primer on there!. next i am going to spraypaint it then i want to to trace a huge picture of bob marley on it!. is there any suggestions of ways to go about this!? i pretty much just wat like an outline of his head with the dreads i just have no idea how to do it!. also what could i cover the top with to make it water proof!? polyurethane!?Www@FoodAQ@Com
Answers:
For the picture:
Find an 8 1/2 x 11 version of the picture that you want to use!. Divide that picture into even grids using a ruler and a pencil!. Now, divide your table into the same amount of even grids!. All you need to do is draw what you see in each grid on the paper on the table!. In your case it will be easy since you just want the outline!.
Finish:
Clear coat finish is available at any store that sells paint!. Stay away from the spray on!.!.!. I find it doesn't coat evenly !.!.!. too thin in some places!.!.!. to thick in others!.Www@FoodAQ@Com
Find an 8 1/2 x 11 version of the picture that you want to use!. Divide that picture into even grids using a ruler and a pencil!. Now, divide your table into the same amount of even grids!. All you need to do is draw what you see in each grid on the paper on the table!. In your case it will be easy since you just want the outline!.
Finish:
Clear coat finish is available at any store that sells paint!. Stay away from the spray on!.!.!. I find it doesn't coat evenly !.!.!. too thin in some places!.!.!. to thick in others!.Www@FoodAQ@Com